Share your shave of the day!

  • PorkButtsNTaters666
    link
    fedilink
    arrow-up
    5
    ·
    11 months ago

    October 29, 2023


    AYLM soaps tend to be finicky with the water here, and I need to load considerably more than with other soaps. Today I didn’t, and the lather kept vanishing on my face.

    Have a good day!

    • djundjilaMA
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      11 months ago

      That Parker looks great!

      Do you have very hard water?

      I’m looking forward to trying those AYLM samples you gave me when TabOktoberfest is over, BTW 😊

      • PorkButtsNTaters666
        link
        fedilink
        arrow-up
        2
        ·
        11 months ago

        Do you have very hard water?

        Yes, lots of calcium in the tap water - it doesn’t matter too much with most soaps, but AYLM doesn’t like it at all.

      • waldenMA
        link
        fedilink
        arrow-up
        2
        ·
        edit-2
        11 months ago

        Hard water - -

        Lemmy changes - - to –

  • djundjilaMA
    link
    fedilink
    arrow-up
    4
    ·
    11 months ago

    Twenty-ninth Day of TabOKtoberfest

    • Brush: Dogwood Handcrafts Tabak Oridjinal
    • Razor: Zwilling J. A. Henckels Friodur Unnumbered 8/8" ( hollow ground, stainless steel, round point)
    • Lather: Mäurer & Wirtz – Tabac Original
    • Post Shave: Mäurer & Wirtz – Tabac Original
    • Fragrance: Mäurer & Wirtz – Tabac Original

    Ok, just wow. This big unnumbered Friodur is something else. I replaced its broken scales on Friday and honed it yesterday. The result not only looks stunning, but it’s also a heavenly smooth razor. I’ll try it again tomorrow, but my preliminary impression is that I think this must be my smoothest and sharpest edge to date. It felt almost like a coated Kismet, but with that calm weight and heft of a 14 (It’s not a 14, though, more on this later): It’s a little like starting on an incline, with a tractor. You have all that raw power, you give only a tiny hint of an impulse on the pedal and off you go smoothly, gently and in full control. Like resistance is irrelevant. The feeling of wiping off whiskers with a feather, but with the size of an FBU.

    I’ve been trying to read about the unnumbered Friodurs, but I can’t find a any good info. Regarding its age, Griffith Shaving Goods is selling one that looks just like mine:

    (they sell it as a 7/8", and mine is just a smidge over 8/8",

    but it’s the closest I could find), they claim it’s from the 1980s or 1990s. So this might be from the last production runs before the Twin Works stopped making straights?

    Either way, it seems to be ground “more hollow” than the 14, in the sense that thinned part of the blade goes closer to the spine, and it’s also a different blank, with a straight tang and spine, and absolutely no smile. So this is clearly not a member of the legendary family of “14” blades, see below for a comparison with a Friodur 14 (middle) and Filarmónica 14 (bottom):

    but my initial impression couldn’t be better. Just wow.

    Pinging @gcgallant@sub.wetshaving.social, the search is not over with yesterday’s Frio 14, you’ll want this in your den, too. At the very least for science.

    Stank ++;

    • gcgallant
      link
      fedilink
      arrow-up
      2
      ·
      11 months ago

      I’ve seen the one on Griffiths, and have been tempted, but unreliable forum rumor suggests that the later Twinworks-labeled razors (as opposed to Zwillingswerk) are not considered to be as good. Of course, some folks don’t consider stainless razors worth using ;-)

      The blade shape on my Frio 14 is similar to your unnumbered one, and I was noticing during this morning’s shave that access to certain hollow areas on the neck are a little more difficult with this one than with my two other 14s. It’s a solvable problem, though. Oh, and I have a fourth 14-style razor (“for science”) on its way to me from across the pond.

      • djundjilaMA
        link
        fedilink
        arrow-up
        2
        ·
        11 months ago

        the later Twinworks-labeled razors (as opposed to Zwillingswerk) are not considered to be as good.

        Both mine and the one on Griffiths are stamped Zwillingswerk, so problem solved 😅 But kidding aside, I find it difficult to get any info that isn’t just some dude’s opinion when it comes to Frios.

        The blade shape on my Frio 14 is similar to your unnumbered one

        From the pictures, it seems like yours has the normal 14 blank, with the curved fat tang and the slight curve in the spine. The unnumbered 8/8" has a perfectly straight and more slender tang. and both the spine and edge are perfectly straight, too.

        access to certain hollow areas on the neck are a little more difficult with this one than with my two other 14s.

        What do you mean? Access for cleaning?

        Oh, and I have a fourth 14-style razor (“for science”) on its way to me from across the pond.

        Oh, “14-style”. So not a 14 per se? Let me guess: you already have the Koraat 14-2.0, it’s not a Frio 8/8 or you would just have said “me too”, so… you sprung for the Böker 14?

        • gcgallant
          link
          fedilink
          arrow-up
          1
          ·
          11 months ago

          From the pictures, it seems like yours has the normal 14 blank, with the curved fat tang and the slight curve in the spine.

          I was referring to the edge profile. Most of the 14s seem to have an edge with a slight smile. My Fili has it, and my Koraat has it, but my Frio 14’s edge is almost straight.

          access to certain hollow areas on the neck are a little more difficult with this one than with my two other 14s.

          What do you mean? Access for cleaning?

          Access for shaving. I’ve found that the blade’s heel section does a great job of shaving hollow areas to either side of my Adam’s Apple. A tiny smile at the edge seems to help.

          so… you sprung for the Böker 14?

          No. It’s a custom razor made by Boris de Riviere (River Razors). It will probably take 5 days to travel to the US from France, then it will probably sit in US Customs for about 3 weeks. With luck, I’ll get it towards the end of November.

  • waldenMA
    link
    fedilink
    arrow-up
    4
    ·
    11 months ago

    October 29, 2023

    • Brush: L’Occitane Plisson Synthetic
    • Razor: Chiseled Face - Legacy Raw Titanium (#69)
    • Blade: Derby Premium (2)
    • Lather: Chiseled Face - Gearhead - Soap
    • Post Shave: Pinaud - Clubman Special Reserve - Aftershave
    • Post Shave: Eufros - Dama Noche - Balm
    • Fragrance: Azzaro - Pour Homme Night Time - EdT

    So good.

  • gcgallant
    link
    fedilink
    arrow-up
    4
    ·
    11 months ago

    October 29, 2023

    • Brush: Elite Razor Honduran Rosewood Burl 24mm HMW Fan

    • Razor: J.A. Henckels Friodur 14 Full Hollow Square Point (Straight Shave 362)

    • Lather: Wholly Kaw - Entropy Man - Soap

    • Post Shave: Unilever - Brut - Aftershave

    • Post Shave: Thayers - Rose - Toner

    2 passes. Face lather. Excellent shave.


    Entropy Man - tobacco, leather, plum, rum, etc. This is another scent that I can’t get enough of. And I don’t have the splash! Need to rectify that.

    Today was my second use of the Frio 14. Wonderful, as expected.

    Enjoy your Sunday!

    Boltzmann++;

    • djundjilaMA
      link
      fedilink
      arrow-up
      2
      ·
      11 months ago

      I love the perspective work on this image. Did you focus stack to get so much depth of field, or is that with a tiny aperture?

      • gcgallant
        link
        fedilink
        arrow-up
        1
        ·
        11 months ago

        Thank you! The image is taken with a 10mm (15mm full-frame equivalent) focal length on a 10-24mm zoom lens. Aperture was f/8. It is a focus stack of two images; one image has the focus on the scale’s pin closest to the camera, and the other image has focus on the soap label.

  • DaveWave94
    cake
    link
    fedilink
    arrow-up
    2
    ·
    11 months ago

    SOTD 29.10.2023

    • Prep: warm water
    • Razor: RazoRock GC 0.84 OC
    • Blade: Voskhod
    • Brush: TGS Galaxy 26 mm
    • Lather: Barrister & Mann - Le Grand Chypre
    • Post Shave: A&E - Wood & Lavender rice water serum

    The cold is almost gone, just in time for me working two early shifts - yeah right, unfortunately school breaks mean work days in my line of work.

    Two pass face shave to look presentable to my colleagues tomorrow. It’s nice to be able to smell nice scents again and LGC is a nice choice for a relaxing Sunday shave.

    Unfortunately, I’m not in a good state mentally. Should’ve posted that in the Free Talk Friday thread, but I currently try to find a new place of work for 2024, together with a few important colleagues who also want to get out of our current situation - wish me luck. 'Cause I’ll need all the luck I can get…