I have a bunch of presence and motion sensors (like four, but shush) and when people leave rooms I would like to turn the lights off after five minutes, however if someone returns to the room before that five minutes is up, I’d like to start that countdown again. Is there a grateful way to do this that isn’t me just doing if no activity for five minutes, turn off the lights, else wait five minutes and then turn off the lights. Because that’s ugly, rigid and not very smart at all.

  • SolidGrue@lemmy.world
    link
    fedilink
    English
    arrow-up
    11
    ·
    10 months ago

    You should be able to handle this in HA within a single automation:

    Trigger: Room is occupied (occupancy > 0)
    Condition: Light off
    Action:

    • Call service: Turn Light On
    • Wait for Trigger: Room is clear for 5 minutes (occupancy < 1)
    • Call service: Turn Light Off

    If you are basing your occupancy on more than one sensor state, you could build a helper to combine the states into a single sensor value, which itself might need a Hysteresis helper.

    I’ve started moving some of my own automations over to this method. It works pretty well, but it is susceptible to being interrupted by restarts or reboots. You may need to build in additional logic to reset things to a known state on startup.

    • sabreW4K3@lemmy.tfOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      edit-2
      10 months ago

      Bloody hell! So I saw this and it was like my vision cleared! I’m actually lost for words, but thank you. I don’t know why I didn’t realise what wait for trigger did, but holy fuck, you’re beautiful, thank you so much!

    • DrM@feddit.de
      link
      fedilink
      English
      arrow-up
      4
      ·
      10 months ago

      It’s also important to set the mode of the automation to “restart”, then it works flawlessly

        • DrM@feddit.de
          link
          fedilink
          English
          arrow-up
          2
          ·
          10 months ago

          I don’t want to set a misunderstanding: this does not solve the state on reboot issue, maybe “flawlessly” is not the correct word. On a reboot, all automations are always stopped, so that does not help here.

          • SolidGrue@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            10 months ago

            No, no. I do sometimes have to contend with race conditions and reentrant triggers. I never considered looking into whether it was possible to change the execution mode, even if I did read that documentation without understanding what it meant.

            Thanks for the pointer back to it. Now I grok it.

  • maxgyver@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    10 months ago

    hi logically i thing you are on the right track. A timer is defiantly the right way to go. You can try my blueprint for your automation. Hope it helps

  • Admiral Patrick@dubvee.org
    link
    fedilink
    English
    arrow-up
    4
    ·
    10 months ago

    Are you doing all the logic in HA or are you using NodeRED?

    I used to have a similar timer reset for my “going to bed” button that I could cancel/snooze before the events started firing. It was done in NodeRED, though, and HA just glued that logic to the UI and buttons.

    • waldenA
      link
      fedilink
      English
      arrow-up
      4
      ·
      10 months ago

      OP would be able to accomplish this in NodeRED pretty easily. It’s probably pretty easy in HA too, but my brain only works with NodeRED haha.

        • waldenA
          link
          fedilink
          English
          arrow-up
          2
          ·
          10 months ago

          I’ve been using HA for about 7 or 8 years (maybe longer?). Everything used to be YAML only, including automations. Now you can set up devices in the GUI, make automations in the GUI, etc., but I learned NodeRED when things weren’t as streamlined. I’ve never bothered to learn HA automations because NodeRED is so great.

          • sabreW4K3@lemmy.tfOP
            link
            fedilink
            English
            arrow-up
            1
            ·
            10 months ago

            How do you feel about the progress that Home Assistant has seen while you’ve been using it? And looking at the climbing adoption, you must feel like a proud parent?

            • waldenA
              link
              fedilink
              English
              arrow-up
              2
              ·
              10 months ago

              It has come a long way, absolutely.

              There was a while where if you didn’t check the change logs before updating, you’d likely be in for some surprises. That’s pretty rare now.

              I don’t really feel like a proud parent because I haven’t contributed much, even in the way of bug reports. I’ve just been along for the ride.

              • sabreW4K3@lemmy.tfOP
                link
                fedilink
                English
                arrow-up
                2
                ·
                10 months ago

                You say that, but the last update broke my thermostat with their new climate controls and also some of my lights needed switching to the light service from the switch service.

                • waldenA
                  link
                  fedilink
                  English
                  arrow-up
                  2
                  ·
                  10 months ago

                  The thermostat backend didn’t change, just the card right? It looks different but didn’t lose any functionality. Sorry you had trouble with it. I have 4 or 5 different thermostats and they never stopped working.

  • waldenA
    link
    fedilink
    English
    arrow-up
    3
    ·
    10 months ago

    In NodeRED it would look like this:

    The top row is triggered when the motion detector changes to “on”. It turns the lights on without delay.
    The second row only triggers if the motion detector has been “off” for 5 minutes. If it goes back to “on” within those 5 minutes, the timer starts over automatically.

    You can try importing it using the following code:

    NodeRED code dropdown
    [
        {
            "id": "1fca03dc3d9e7066",
            "type": "server-state-changed",
            "z": "f3446183.7e46a",
            "name": "Motion On",
            "server": "144bcad2.81b925",
            "version": 5,
            "outputs": 2,
            "exposeAsEntityConfig": "",
            "entityId": "",
            "entityIdType": "exact",
            "outputInitially": false,
            "stateType": "str",
            "ifState": "on",
            "ifStateType": "str",
            "ifStateOperator": "is",
            "outputOnlyOnStateChange": true,
            "for": "0",
            "forType": "num",
            "forUnits": "minutes",
            "ignorePrevStateNull": false,
            "ignorePrevStateUnknown": false,
            "ignorePrevStateUnavailable": false,
            "ignoreCurrentStateUnknown": false,
            "ignoreCurrentStateUnavailable": false,
            "outputProperties": [
                {
                    "property": "payload",
                    "propertyType": "msg",
                    "value": "",
                    "valueType": "entityState"
                },
                {
                    "property": "data",
                    "propertyType": "msg",
                    "value": "",
                    "valueType": "eventData"
                },
                {
                    "property": "topic",
                    "propertyType": "msg",
                    "value": "",
                    "valueType": "triggerId"
                }
            ],
            "x": 80,
            "y": 1160,
            "wires": [
                [
                    "d01a14f220a57b71"
                ],
                []
            ]
        },
        {
            "id": "d01a14f220a57b71",
            "type": "api-call-service",
            "z": "f3446183.7e46a",
            "name": "Lights On",
            "server": "144bcad2.81b925",
            "version": 5,
            "debugenabled": false,
            "domain": "",
            "service": "",
            "areaId": [],
            "deviceId": [],
            "entityId": [],
            "data": "",
            "dataType": "jsonata",
            "mergeContext": "",
            "mustacheAltTags": false,
            "outputProperties": [],
            "queue": "none",
            "x": 300,
            "y": 1160,
            "wires": [
                []
            ]
        },
        {
            "id": "5737d7e58d22e1a6",
            "type": "api-call-service",
            "z": "f3446183.7e46a",
            "name": "Lights Off",
            "server": "144bcad2.81b925",
            "version": 5,
            "debugenabled": false,
            "domain": "",
            "service": "",
            "areaId": [],
            "deviceId": [],
            "entityId": [],
            "data": "",
            "dataType": "jsonata",
            "mergeContext": "",
            "mustacheAltTags": false,
            "outputProperties": [],
            "queue": "none",
            "x": 300,
            "y": 1200,
            "wires": [
                []
            ]
        },
        {
            "id": "b203774e1f8bea1f",
            "type": "server-state-changed",
            "z": "f3446183.7e46a",
            "name": "Motion Off for 5",
            "server": "144bcad2.81b925",
            "version": 5,
            "outputs": 2,
            "exposeAsEntityConfig": "",
            "entityId": "",
            "entityIdType": "exact",
            "outputInitially": false,
            "stateType": "str",
            "ifState": "off",
            "ifStateType": "str",
            "ifStateOperator": "is",
            "outputOnlyOnStateChange": true,
            "for": "5",
            "forType": "num",
            "forUnits": "minutes",
            "ignorePrevStateNull": false,
            "ignorePrevStateUnknown": false,
            "ignorePrevStateUnavailable": false,
            "ignoreCurrentStateUnknown": false,
            "ignoreCurrentStateUnavailable": false,
            "outputProperties": [
                {
                    "property": "payload",
                    "propertyType": "msg",
                    "value": "",
                    "valueType": "entityState"
                },
                {
                    "property": "data",
                    "propertyType": "msg",
                    "value": "",
                    "valueType": "eventData"
                },
                {
                    "property": "topic",
                    "propertyType": "msg",
                    "value": "",
                    "valueType": "triggerId"
                }
            ],
            "x": 100,
            "y": 1200,
            "wires": [
                [
                    "5737d7e58d22e1a6"
                ],
                []
            ]
        },
        {
            "id": "144bcad2.81b925",
            "type": "server",
            "name": "Home Assistant",
            "version": 5,
            "addon": true,
            "rejectUnauthorizedCerts": true,
            "ha_boolean": "y|yes|true|on|home|open",
            "connectionDelay": true,
            "cacheJson": true,
            "heartbeat": false,
            "heartbeatInterval": 30,
            "areaSelector": "friendlyName",
            "deviceSelector": "friendlyName",
            "entitySelector": "friendlyName",
            "statusSeparator": "at: ",
            "statusYear": "hidden",
            "statusMonth": "short",
            "statusDay": "numeric",
            "statusHourCycle": "h23",
            "statusTimeFormat": "h:m",
            "enableGlobalContextStore": true
        }
    ]
    
      • Flying_Hellfish@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        10 months ago

        No, but you CAN use HA timers in NodeRED. You just have to trigger off the state of the timer itself. I did get it to work but it was quite a bit of spaghetti, I found it easier to use eventID triggers in the standard automation GUI for dealing with persistent timers.

      • waldenA
        link
        fedilink
        English
        arrow-up
        2
        ·
        10 months ago

        When I restart mine, I restart HA only, and all of the add-ons (including NodeRED) keep running. The problem is as soon as HA restarts, it blasts all of the states to NodeRED, and for the most part (I think), they all go from “unavailable” to “on/off”. This restarts whatever timers NodeRED keeps track of. I don’t know of a good way around this, but I restart HA so infrequently that it doesn’t matter for me.

    • sabreW4K3@lemmy.tfOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      10 months ago

      OMG! What type of person are you? I ask a simple question and you introduce me to cool new stuff and now I need to learn all about it. You will be recommending me NodeRed videos for weeks now.

      Thank you!

  • TedZanzibar@feddit.uk
    link
    fedilink
    English
    arrow-up
    2
    ·
    10 months ago

    I have something like this setup for my porch lights. Light goes on when it detects motion, then it uses wait_for_trigger to wait until the motion stops before starting a 20 second and turning off the lights.

    All simple enough so far but, crucially, the “mode” for the automation is set to restart. That way if the sensor detects motion during the 20 second countdown it cancels the whole run and starts again from the top.

  • Claude Flammang@dju.social
    link
    fedilink
    arrow-up
    1
    ·
    10 months ago

    @sabreW4K3
    Create a timer that you set to 5 minutes.
    Create an automation with 3 triggers:

    1. Motion is detected
    2. Motion clear
    3. Timer changes to idle

    Choice of three actions:

    When 1:
    Switch light on
    Cancel timer (this takes care of motion being detected again during the 5 minute delay)

    When 2:
    Start timer (And let’s wait for 5. Minutes for timer to end)

    When 3:
    Check that motion is clear (as motion also cancels the timer)
    If so, switch light off

    • sabreW4K3@lemmy.tfOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      This broke my brain at first. I had to keep coming back to it. Thank you so much.