• 2 Posts
  • 24 Comments
Joined 1 year ago
cake
Cake day: June 22nd, 2023

help-circle

  • Over the years I have used OSMC for my TV. I have never used it for streaming however always internal across the network streaming of my own content. It worked reasonably well for the most part although I have had issues with Samba in recent versions and have stopped using it. I can’t say much about its streaming, mostly for that you need a supported android or similar device rather than an open source one.



  • I have done this a few times, so long as the drive isn’t mounted it works fine.

    One advantage of this approach compared to clonezilla is you can pipe it through netcat or similar and move it to another machine. You can also first pipe it through gzip as well to save on the transfer bytes a bit as well and then on the other end just store the compressed image or unzip it. Combine a few tools together and you have quite a lot of capability for complete image backups but its usually best done for the boot drives from a live USB.


  • Ideally for your router you want something that runs an open source firmware (OpenWRT, DD-WRT, OPNSense, FreshTomato). Its better because you get a completely unlocked everything you need system with security patches for the hardware’s true lifetime. Every router company stops with the security updates after a few years and then at some point it becomes part of a bot net or one of this mass hack events. Its best not to play in that game and instead run some open source firmware from the outset.

    The best way to start is to look at the website for openwrt.org and use their filtering to find a device that supports your needs (at least 5 LAN ethernet ports I guess and some wifi but AC sounds like it will do). The other option is a more typical 4 LAN port router which will give you a lot more options and then add a switch to that, doesn’t sound like you care too much about it being managed or >1gbps so they are also dirt cheap.


  • You only really get the choice between misinformed or uninformed, there is no option where you can be informed enough on the topics you need to know about.

    While they are right that misinformation in social media is causing a lot of the problem I think misinformation in the press is also driving people to seek information in social media. You can’t have governments and the press repeatedly proven to be lying and have the population accept that version of reality they push. What replaces it is a variety of conspiracy theories, some are just genuine conspiracies but definitely not in the mainstream press. This second aspect the research is consistently ignoring and it matters because its a large part of what is driving people to conspiracy theories. Fake news is not about Trumpnews or theonion its about the mainstream media however much they try to deflect from it.


  • They are still going for big building size reactors that have site specific details even if the core is built in a “factory”. This still doesn’t scale well.

    I wonder if it can be economical to go smaller still and ship a reactor and power generation (TRG maybe or a small turbine) that then doesn’t require much other than connecting wiring and plumbing and its encased in at least one security layer covered in sensors if something goes wrong its all contained. Then its just a single lorry with a box you wire in. That has a chance of being scalable and easy to deploy and I can’t help but think there is a market for ~0.5-10 KW reactors if they can get the lowest end down to about $20,000, it would compete OK with solar and wind price wise.

    I suspect no one has bothered because the regulatory overhead means it has to be big enough to be worth it and like Wind power scales enormously with the size of the plant. But what I want is a tiny reactor in my basement, add a few batteries for dealing with the duck curve and you have something that will sit there producing power for 25 years and a contract for it be repaired and ultimately collected at end of life.

    You can sort of do this today using the Tritium glow sticks and solar cells but it doesn’t last long enough and the price is not competitive. Going more directly to the band gap in a silicon or something else semi-conductive and a long lived nuclear material could maybe get a little closer price wise.


  • It doesn’t really make much sense to go faster than silicon node changes unless there is a lot of optimisation on architecture that needs doing. Historically all these refreshes between nodes were largely pointless with small benefits and preparing them took development effort away from the big changes. It’s progress in silicon that matters and brings the performance improvements and moving to a faster cadence hasn’t historically worked out well.


  • I don’t think modern Raspberry pi’s make much sense unless you are using GPIOs or really need the low power consumption. The 3 and the 4 were OK price wise but the pi 5 is quite close to all these N100 mini computers and they are a lot more performance and expansion compared to a raspberry pi 5 and still quite low power.

    Either a Topton or similar N100 based machine or a mini PC second hand is the way to go at the ~$100 mark. The mini PC will be faster and probably more expandable and cheaper but also more power consumption.






  • BrightCandle@lemmy.worldtoPrivacy@lemmy.mlThoughts on Cryptocurrency?
    link
    fedilink
    arrow-up
    2
    arrow-down
    1
    ·
    edit-2
    3 months ago

    I have used Bitcoin a number of times for international purchases. Its not really got to the point of currency so much as a medium mostly of speculation and often interchange for crime but it can improve your privacy. The user experience of the payments isn’t the best but international transfers are often hard to do anyway and in that particular field it can often be a lot quicker, cheaper and easier.


  • Most of the cookie banners are breaking GDPR. The requirement under GDPR is that privacy must be the default and users can select to opt in. So most of the banners you come across that default to all tracking are against the law already. The legislation didn’t stop them being annoying in this way but a few prosecutions for the breaches and dark patterns would set things off on a better path.


  • The best alternative I found when doing this was Mylk, which is Oat based but a lot more complex a formulation than most of the just Oat milks, the whole equivalent is the best, the coffee targeted one IMO wasn’t great but its worth a try also.

    However ultimately I learnt how to make coffee to get more complex flavours out of it and bought speciality coffee with a decent grinder and ended up finding sweetness in the coffee itself when its brewed well. This is the rabbit hole that is worth pursing, black coffee made a variety of ways.

    The other possibility is start taking in some homemade kefir, it might reduce the lactose intolerance.



  • Army painter or games workshop are very much trusted in the miniature painting scene. They have undercoat spray cans (which as the adult you might need to do yourself) and then the paint sets themselves have all been around a long time with good safety profiles. I haven’t had any issues with this process over pla other than the layer lines being tricky to paint and work with but paint adherence has worked fine.




  • For not a lot more you can now get NUC like machines with Celeron’s, Pentiums and get to choose NVMe SSDS and RAM amounts and even Wifi cards (so wifi 6e or 7) and 2.5 gbit/s ethernet. At these sorts of prices they are running into the low end of NUCs at $100 and they don’t compete well on a whole range of factors. They are still cheaper but its not the 30-40 of the Pi before prices went nuts and this new higher price point isn’t as clear cut.