![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://lemmy.ml/pictrs/image/d3d059e3-fa3d-45af-ac93-ac894beba378.png)
“Sealed” is also a vague suggestion with HVAC. Every ducting join, every piece of equipment, all of it leaks. I shudder to think how much heating/cooling is wasted that way.
“Sealed” is also a vague suggestion with HVAC. Every ducting join, every piece of equipment, all of it leaks. I shudder to think how much heating/cooling is wasted that way.
This. Satire would be writing the article in the voice of the most vapid executive saying they need to abandon fundamentals and turn exclusively to AI.
However, that would be indistinguishable from our current reality, which would make it poor satire.
The issue with “Human jobs will be replaced” is that society still requires humans to have a paying job to survive.
I would love a world where nobody had to do dumb labour anymore, and everyone’s needs are still met.
I kind of disagree with you, in that when I think about the standalone meanings of the words in each phrase, I think they do say the same thing.
The meaning of the words “You are welcome [to the help I gave you]” implies, to me, that there wasn’t actually anything to offer thanks over. You’re acknowledging their thanks, but telling them that they are welcome to take/use whatever it is you’re talking about. [EDIT: normally when someone tells me I’m welcome to something, I feel less compelled to ask and thank in the future. “You’re welcome to anything in the fridge”, for example.]
It does not imply, to me, that I would appreciate them returning the favour. That might be implied meaning in the phrase, but it’s definitely not what those words mean by themselves.
In any case, “You’re welcome”, “no problem”, “no worries”, etc… are all idioms that mean something different than what their individual words mean. The phrases as a whole carry a different meaning than the words themselves suggest.
Yes, with two hoses they are measuring count, speed, and vehicle weight. Not enforceable, as many others have said - nobody will be getting a speeding ticket from this. It’s just data collection.
Note: force measured on the hoses is a function of vehicle weight and speed. If you only have one hose, you can’t tell the difference between a light vehicle moving fast and a heavy vehicle moving slow. With 2 hoses you can now measure speed, which you can then use along with the pneumatic force to figure out weight.
It does not. Circumference only tells you speed if you’re measuring tire rotations, which this is not.
That sounds like a problem from using too small of a drive. Every torque curve I’ve seen for brushless DC or AC servos is constant torque from 0 to about 75% rated RPM, and then starts to drop off.
Well, that’s why you use a proper servo drive. Yes, technically they oscillate at standstill, but it’s so little it literally does not matter. Closed loop servo control is a solved problem unless you’re trying to implement it yourself.
I don’t know why you’re getting down voted. You’re correct, steppers are used due to cost.
I disagree with all your points. What kind of servos are you talking about?
BLDC and AC servos maintain full torque at stop too, and have about 2-3× the torque of a stepper of similar size.
The only way a stepper can rival a servo for precision is with a high degree of microstepping, which is far from guaranteed positioning with open loop control.
I haven’t directly compared response time between steppers and servos, but I would be extremely surprised if there’s a significant enough difference to worry about. Most servo-controlled machines are larger and so are designed to accelerate slower than a printer, if that’s what you mean. This is intentional because inertia is a thing you have to worry about, not because the servo reacts to command changes slowly.
There are valid reasons steppers are used on printers, but it’s not because they have superior performance.
Cost is the short version, yes.
I don’t know what kind of servos everyone here is talking about that are less precise than open loop steppers. Low quality hobbyist stuff, I guess? Proper servo motors & drives are the standard for good reason for robotics, industrial CNC machines, and pretty much everything else that needs powerful motors with high precision. Much higher power density, higher RPM (good for increasing torque with a gearbox), equivalent or better precision, plus closed loop control is a huge capability and safety gain.
That said, good, industrial quality servo motors are 1) expensive and 2) aren’t made in small enough sizes to be comparable to the steppers on most 3D printers. Even the smallest industrial servo + drive I’ve seen is about 5x as big as the steppers on a personal 3D printer and costs $800ish. Obviously, both are deal breakers for a personal 3D printer.
3D printers are a fairly ideal application for steppers. The moving parts are small and light, meaning you both don’t need a large motor and the danger of slippage is lower. Plus, steppers are cheap.
Wasn’t it almost a year ago that he announced this was his plan?
Agreed. Don’t make a threat - just make the GDPR complaint. Inform the company if you want. How many times have you remembered to follow up on one of those threats to see if you should still make a complaint?
It’s not infantilization. These bills are designed to prevent “one more hoop” design by the company to make it too annoying to unsubscribe. Your position assumes good faith behaviour by the company with the newsletter. That is absolutely not a given.
I don’t disagree that the people with money who are funding this kind of development don’t care about regulations or safety.
That said, the idea that they’ll do it out on the open sea or in space are absolutely laughable. Those ideas pitched so far completely ignore all the obvious engineering problems. Not to mention that going to international waters to avoid regulations means that the navy of that country you’re thumbing your nose at now has free reign on you.
In other words, AGI is what every layperson thinks of when people talk about AI. It’s (sort of) what you see in the movies.
LLMs, and every other AI technology we currently have, do not actually have any form of intelligence. They’re called AI because the sub-field of computer science that they arose from is called AI, and has been for decades.
Came here for this, thank you for your service.
That analogy relies on the reader having any idea what wire EDM manufacturing is. ;) Not exactly an everyday topic.
*Thinnest and yet roughest. Not thick enough to be a barrier, and it can rub you raw to provide an entry point at the same time!