This really summarises the passive aggressive level you get to with a 3D printer: “Lift off the bed now you little fucker!”
This really summarises the passive aggressive level you get to with a 3D printer: “Lift off the bed now you little fucker!”
So a combination of three changes finally got me back the correct result.
Thanks for your help!
So a combination of three changes finally got me back the correct result.
Thanks for your help!
So a combination of three changes finally got me back the correct result.
Thanks for your help!
I will check that, I hope its that as that would be an easy fix. Also I only use matte filament.
When you say pressure of the z-axis, do you know what they meant exactly? Not sure it could be temp as it’s the same, however I did change the part cooling fan in case that was faulty and the material wasn’t cooling fast enough
Thanks! I’ll update the thread when I test it so there is a log for anyone else who may experience this issue.
That’s interesting, thank you, I’ll double check that too.
Extruder gears seem free, but I did just notice that the POM wheels on the x-gantry seem to have flat spots in them. This could be the cause so I’ve bought some new ones to test the theory.
I’ve not had any first layer issues, all have had good extrusion and adhesion. Nothing appears to be touching.
Could be, however. I’ve had the same issues with multiple filaments that I’ve used for over a year, however this has only been happening in the last month.
It has a Bigtreetech SKR mini E3 V3, but stock otherwise.
Yes to everything in the first sentence. It’s not consistent, maybe 1 in three come out perfect, then the others turn out badly.
I also found a huge difference between filaments. Creality was terrible for me, Reflow is great