It’s fine, I have several UPSs on a critical loads panel that I’ll run off an Ecoflow during extended power outages. And just for the heck of it, I’ve run my big office UPS directly off the EcoFlow all day. As I have rooftop solar this doesn’t provide any daily benefit aside from backup, but it’s perfectly fine to do so. It doesn’t provide any economic benefit, most likely, though.

I would definitely use only a pure sine wave inverter. Fortunately these days it’s mostly the norm.

Heh, typing YAML anywhere is squinty business. :⁠-⁠)

I use syncthing all over the place for this sort of thing. I have some sync directories that are multi way synced across multiple devices, others that are one-way drop targets to a specific device, others that are for operations like backing up photos. It’s quite excellent with a good sync algorithm that rarely results in conflicts.

Another suggestion for Darktable. It handles this case of mixed types transparently. It’s a big thing to learn, but extremely powerful and capable, and you don’t have to know all the corners of it, just enough for your workflow.

Address already in use is the key - something else has already bound to that address:port combination. Next step is to find out what process is listening on it. Try ss, netstat, lsof to name a few hints.

ESPHome is amazing - there’s so much you can do without writing a single line of code.

I have built a few projects around the platform - a boiler monitor that tells me temperatures and state of zone valves, an energy monitoring system tracking electricity usage and solar export, and a hot tub mod that inhibits the heater to reduce grid import and maximize self consumption of solar. They have all been rock-solid stable.

ZHA here. I picked it since it’s a bit easier to set up with less bits. It works for me, so I didn’t see a reason to change it. I have done channel changes a couple of times with no issue - maybe I just got lucky!

FreeCAD. It’s fantastic but takes some getting used to. I recommend the Ondsel fork - it’s still free and open source except for the cloud storage which you can ignore. Ondsel includes some newer features and some interface changes.

When I’m forced to, and not before then. X works perfectly well so there’s no reason for me to switch to something else with less features.

Reboot to the snapshot you took of the root fs before starting the update, then just rerun the upgrade. If you are using btrfs (or ZFS) make use of its features so you never have this sort of problem.

It’s not that bad, glue and screw. Remove the inner board from the drawer front and reattach it to the drawer first. You might have to clean up the MDF a bit. Use filler if you have to, maybe, but don’t use nails. Then reattach the drawer front - again with screws. It might not look perfect, but it’ll probably look fine when the drawer is closed. Consider wood block fillets at the interior corners (sacrificing a bit of space).

Alternatively you could rebuild the drawer frame, using the same drawer front so it matches.

I have not encountered this with my Sonoff Zigbee plugs, for whatever that is worth (US split phase). I also haven’t put large appliance loads on them.

Just don’t open the drawer if you don’t want the drawer - doesn’t that make the most sense versus looking for something with few features? Never look to Apple for the right answer - that is always a good place to start.

Nova launcher lets you customize how the app drawer is opened - so you can turn off gesture opening via one of the other options. Nova is a great launcher, I switched to the paid version a couple of years back and found it to be my favorite. I just wish they’d launch Nova 8 which has been in beta for 2 years already.

I just put it in my dryer at 40C for a few hours with little regard to a target humidity. I also live in a dry climate where the ambient humidity is low, so maybe it’s not enough in wetter climates, but this works for me.

I 3D print up a custom one, sized for each project.

So what do I have wrong here?

Nothing, as far as I’m concerned. I guess DEs have to constantly change or they become stale to some people. I’m an older guy than the normal demographic here too and stale is exactly what I want. I run i3 with a bunch of terminals, a browser, and sublime text when vi in a terminal isn’t enough (yes, it’s really vim, but it’ll always be vi to me), and I xsetroot the classic weave pattern for my background. That’s it. I don’t need or want menus, widgets, themes, file managers or anything else. I guess someday Wayland will win, and I’ll be forced to do something different, but until then, not changing this extremely productive and efficient environment.

I don’t use Fedora, but I have ZFS on all my Arch systems for everything (including root fs). So, I’ll make a guess - is the package you installed for ZFS a DKMS kernel module, or a binary one? That’s the first thing. If it’s a DKMS module, I don’t see anything on your output showing it was compiled, which would explain the module not loading. If it’s a binary module in that package, it must be for the exact same version of the kernel that is installed - exact same. If it mismatches then you need either a different kennel or different ZFS package. In either case, you’ll probably need to wire in a hook for your initramfs, but it looks that part might be ok from your output. Hope that helps, good luck. ZFS is incredibly good.

urxvt is the only terminal I’ll use. Every time I try something else I come back to it because of some basic thing that’s not right - usually font rendering which urxvt is one of the few that works well with scalable fonts. It’s fast and simple and does everything I need without any bloated stuff I’ll never use.

Yep, it’s because of that proprietary and “every device must be licensed” nature of Z-wave that I use Zigbee devices - I’ll pick an open platform everyday over a closed one, even if it has limitations.

Just install arch if that’s what you want.

Otherwise, RTFM - debootstrap.