I knew before I even clicked in it would be some shitbox by Chrysler.
Well, I got rid of KDE and I’m on Cinnamon right now, so where are these tearing issues? You think I would have noticed after over a year of use.
Why would I care what software KDE comes with? This is Linux. I can install whatever works best for me. Including the whole of KDE software suite if I so chose. You KDE fans are voracious.
better multi monitor support
I run a 3x1 setup and KDE didn’t handle it any better than Cinnamon did.
Wayland support is coming to Mint. You can actually use it on 21.3 right now but it is unstable.
Rest of what you said is opinion.
Everyone switch to IRC, quick!
Hopefully someone recommended for you to grab the .2mm nozzle since you’re interested in minis.
so you can’t really pirate it.
Is it still pirating if you use pirating methods to obtain it?
What I linked is the official ISO from M$
windows 10 iso are not available for download
You mean this isn’t available to download; https://www.microsoft.com/en-us/software-download/windows10ISO
Or something else?
huh?
FUCK THE BIG 3
Nah, it would just circumvent them.
Kept forgetting to tell you, you will want this for your ams and I use these for dryboxes. You can just grab some totes from the dollar tree or somewhere cheap and throw those in with the filament. Quick and easy way to keep your filament dry.
Here’s a hygrometer stand of the same type so you can keep it uniform.
Fill them with this stuff here.
Make sure it’s the rechargeable kind so you can just keep redrying it and you’ll never run out.
This is all especially important if you plan on printing PETG. PETG is affected much more by moisture than PLA.
If you mean copy/pasting the bar to the new screen/placement, I’m not sure. I’ve never gotten it to do anything other than create a new empty bar. When you look through the applets though it shows which ones you are already using and what they do so you can just click the + when you’re editing you new bar to add the thing you know you’ll want there.
Also, try out Cinnamenu, it’s better than stock start menu imo.
Well support structure will be needed on overhangs and stuff like that so don’t write it off.
I don’t use it much since I’m mostly printing things that don’t need it as they were designed to print in place.
No, no. I offered assistance.
What do I do with the white one? Put it in the last slot? Does the machine know when to use the white one as a support?
I don’t use the support filament as I have enough filament that using a bit for a model or two here or there isn’t a huge loss. However, you can use the Bambu Studio program and “paint” the support structures with that filament and it will use that instead of whatever normal filament you are using.
(Note on this, because these machines use NFC for the official bambu filaments, it might do it automatically. Don’t count on that though and always double check.)
You can keep it in your AMS anywhere you like, but for those onboard print files, it typically uses AMS slot one.
What would you consider is your favorite filament to work with? I’m thinking of splurging on a set off ebay. But at the same time, are discount filaments ok?
I love Inland filaments because I’m close to a Microcenter and can go and physically look at them before purchasing them. If you aren’t close to a Microcenter though, Inland filaments are Polymaker and eSun.
If you plan to get cheap filament, make sure you keep your bed as clean as you can because you want to rule that out immediately if there is an issue. I use Isopropyl alcohol before every print to remove any grease/oil/dust from the bed.
And do you use a special plate? People have mentioned golden ones that are easier to bend to pop out the build? Mine just scraped off fairly easy. And I’ve read to use hairspray or windex to make it easier to pop off later.
I use the standard PEI plate that comes with the machine. I allow the bed to cool off in the machine and then get the print off. Makes it much easier.
Controlling these printers is best done from a PC. Bambu Studio will give you the most options to control your prints. The Bambu Handy app works great as well but I find it limiting.
It’s ok, my dude. We all make simple mistakes like this. I’ve cost myself entire rolls of filament before. If you ever have any questions, give me a shout, I’ll give you a hand.
Shit goes by many names, but it’s still shit.