A little off topic, but on first glance I thought that website was called fart caller.

On topic, I’ve never Heard of this service. I still haven’t setup anything like this. Might give it a try.

The lock itself is fine. I can do pretty much everything with the zwave once paired. Locking and unlocking are pretty quick and easy. You can setup a few different numbers too (haven’t played with it too much once setup). It has a sensor to detect if the door is open, but it’s pretty slow. Sometimes I can open and close the door before it knows it’s open. More of a door left open sensor.

Our door lock it well aligned, but it’s yours is off I could see it being an issue, but that’s any motorized lock.

Battery life seems pretty good considering we use the lock multiple times a day. Just 4 AA batteries I Believe. It also beeps at you when you lock/unlock before it dies so you have a fair warning.

I have one. You still need the app to setup the lock, which is unfortunate. Once it was setup I just deleted the app.

I can’t updoot you enough. I hate that so much too.

I’ve been enjoying bazzite!

I have lawnchair and it supports work profile. At least as far as I know. I can swipe left/right to see my work apps in the app drawer. Not sure if there’s something else.

I’m running 14 beta 2 https://github.com/LawnchairLauncher/lawnchair/releases

It looks like it uses chrome for certain data, and I’m not a fan of that. Any idea if I can change that to use Firefox?

Another thought. Try the warranty.

https://www.merillat.com/customer-support/warranty-info.html

Edit: Hmm. Says not transferrable. But I suppose it doesn’t hurt to try

Looking at the picture, a regular piece of wood should work as long as the thickness is the same. Otherwise the front will sit a bit proud if thicker, or there will be a gap if thinner. Though you could trim the dado back on the sides if it’s thicker. Edit: and make sure to measure size before trying to take it off. Just in case it breaks more.

It looks like that particle board is nailed to the face. Hopefully it isn’t glued as well, otherwise it’ll be a beast to get off. Those screws are just for the handle and likely have no structural qualities.

I agree, that piece on the back of the face got pretty mangled, and glueing it up honestly wouldn’t be enough long term.

You could try clipping them off instead of pulling them out. Just use a flush cutter (or as close to flush) and cut them down to the wood. This is what most do when taking our trim, as it can cause more damage to get the nails/staples out.

Hopefully someone smarter than me can help. You can always do what I do, and just blow up the install and start fresh. 😂

Darn.

I suppose you could also try using the lsof command to see if it shows anything different?

Some examples: https://www.cyberciti.biz/faq/unix-linux-check-if-port-is-in-use-command/

This may sound silly, but have you tried restarting? I feel like that worked for me when I had a similar issue in the past. Something was holding onto the port, but it wasn’t showing up anywhere. Restart got it to let go and it worked afterwards.

So, Google is going to buy it?

Lots of good suggestions. I’ve also used memos, but wasn’t a huge fan of how the notes were organized. Solid app and definitely worth a look.

https://github.com/usememos/memos

Edit: I’m holding out hope for when notesnook goes self-hosted.

Edit 2: after looking at my older instance I see they save the notes in a database and is not relevant to your question.

Maybe we just tape a picture of a face to the machine and it will always have bad data.

Oof, purchased by an analytics company probably means they only want it for your/my information.

I’m trying one of the Dev releases that was linked below. So far it’s pretty stable. Not sure your tolerance for any issues that may arise.

Oh sweet! Thanks for the heads up! I was hoping to find a version 14 without having to figure out how to build it myself.