![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://lemmy.ml/pictrs/image/h1ChnLuBHr.png)
I’m currently looking at setting up Reolink cameras on a homeassistant setup.
Not sure if it perfectly meets your requirements, but it should be ad free and closed system.
I’m currently looking at setting up Reolink cameras on a homeassistant setup.
Not sure if it perfectly meets your requirements, but it should be ad free and closed system.
Call the fire department, they have detectors that they can use to look for gas leaks and other things that can set off a detector.
You can also call your gas provider. One of those two should be able to track it down, it could be a lot of things, but two different smoke detectors going off in the same location is a huge red flag.
Best case, you have something kicking up fine dust, worst case, you have a smouldering electric fire in your wall somewhere.
Don’t panic, but also do not ignore this.
How about a 1% tax for every 100lbs the vehicle weighs.
I use my plunge saw for so many things, BUT it does have limitations. I struggle making long narrow rip cuts, and repeatable cuts can be difficult without an MFT style workbench.
It can be a lot safer, cleaner, and easier than a table saw, ESPECIALLY for large panels, but it can’t entirely replace a table saw.
I do agree with this comment, and the 10 minute workshop YouTube channel has a lot of great tips on using a plunge saw (and recommendations on less expensive versions), but just be aware that it’s not a 1-1 replacement.
IF you have enough for a “full size” shop, including workbenches, a table saw, etc. Then I recommend Steve Ramsey (Woodworking for Mere Mortals). He has a lot of projects and shop tips for people just getting started. He also has a website that has a constantly updated buy list for how to build a shop on the cheap.
https://www.youtube.com/@SteveRamsey
IF you are tight on space, but still want power tools, then Peter Millard (10 minute workshop) is a UK woodworker that does a lot of cabinetry and custom builds in a small basement UK shop. It’s really nice, and he even has a series of projects where he starts with just some super basic tools, and then makes slightly more complicated stuff every week.
https://www.youtube.com/@10MinuteWorkshop
IF you want to try your hand at a no power tool shop (which can still be expensive to buy the stuff), then Paul Sellers is a great instructor. Most of his videos assume you don’t know anything and are just starting out.
https://www.youtube.com/@Paul.Sellers
Finally, Stumpy Nubs is a great channel for just general info, shop tips, and safe handling of tools. Just beware that he slips in a lot of “Just buy this one last thing from my affiliate link and it’ll solve all your problems.”
https://www.youtube.com/@StumpyNubs
Wood Whisperer, Tamar at 3x3 Custom, Lincoln St. Four Eyes, Izzy Swan, and a bunch of other channels are a lot of fun too, but most of them have moved into more of a “watch me make this awesome thing with my quarter million $$$ shop.”
The easiest way to learn how to design furniture is to copy existing designs, then tweak them slightly to better fit your style. After a while, you’ll learn how to incorporate different designs into a nearly original piece.
Copy copy copy until you understand what you like, and what works functionally.
How do you set this up to forward properly? Do you use different domains for different services? like plex.example.com?
I currently have nginx set up to forward based on port, which is fine for me, but it could be a little better.
Cool video.
1:30 - how to create the inlays.
2:45 - how to do the nail polish/acetone fill
Trade in value drops very rapidly for non-iphones after a year or two. You can often get 50% back on the purchase by trading in a functional phone.
If you buy a new phone every 2 years or every 4 years, it’s often about the same total out of pocket cost (with a lot of exceptions)
The real answer is that nobody knows because nobody wrote it down.
The most likely reason is because the old game and watch was a single button where the A was on the original NES (famicom) and that was the primary button, then the secondary button, or B, was placed slightly inward where it was assumed it would be used less.
This looks amazing. You rock it well.
Me too. I’ll go first, and if it works, he can do it as well.
#1 - What direction are the floor joists running, you would typically run perpendicular to the joists to minimize waviness on the floor.
#2 - You would typically run it longways past the door, so the sun shining in doesn’t go along the board length.
#3 - There’s really no WRONG way to do this, because the LVP flooring doesn’t have much structure to it, and it’ll just follow the contouring of the subfloor. So whatever way you think looks best, go for it.
#4 - If the walls are really out of square, you can also go at a 45 degree angle to hide that. It’ll use up a LOT more flooring, but it also looks pretty cool when it’s all done.
edit: Picture #2 would be the more “right” way to do it, but again, if that’s not what you like, then it’s up to you. Also, not sure if this was just the way you are demonstrating, but you’re also going to want to have a little more randomness in the board ends, don’t have them alternate in a pattern like you have it.
At LEAST it’s low orbit so it’ll burn up (relatively) quickly.
She did it to herself. She knows, and has always known, exactly what he is. She is a willing participant, not a victim.
I really don’t care, do u?
No Oscar? Cowards.
Saw a neat ESP32 IR blaster on sparkfun. Might try to set it up to control some LED string lights.
Wow, that whole article just shows how dumb Rogan is. He used an online IQ test to prove he’s a genius and then “researched” online to see that IQ is lower recently in the US?
The whole article is repeating what a stupid person thinks about a study. And there is nothing about what the study actually says, or what it means.
There’s lots of ways to measure intelligence, and IQ isn’t really the best one.
Even if it was 2" from the lumber yard, it would shrink or expand quite a bit depending on the moisture content. Expecting natural products to be an exact size would be crazy, especially when talking about construction lumber.
Now this is a very extreme case, but it was probably milled to 1.5" soaking wet, and shrank a bunch after drying out on the rack. That’s also a big reason why they’re all warped.
It’s v1 from a relatively new company, trying something unprecedented. I’m not surprised it has some major flaws. The first Gen framework 13 did as well.
I own a Gen2 and a Gen3 framework 13 and they are both phenomenal. I would recommend them to anyone looking for a slim laptop, that wasn’t overly concerned about cost.
I’m sure the Gen3 FW16s will be great as well, but it’s going to be a bit before I would recommend them to anyone.
What I think would be great for framework to do next is to design a purpose built eGPU for the framework 13. I would really enjoy something that would turn the FW13 into a decent gaming PC, while still retaining the portability for travel.